Saturday, September 19, 2009

15 Awesome Tips for a Long Lasting Laptop


Times are tough, and even with falling prices, the purchase of a laptop computer constitutes a serious investment for the average consumer. Give your laptop a couple more years with these simple tips. There are a lot of ways to extend the life of your notebook, most of which are very simple and which just about anyone can do. If you take care of your laptop from year one, you’ll be thanking yourself heartily during years four, five, six and beyond. And even if you’re already in the latter years, it’s never too late to start.

Source: Laptop Logic

This guideline is divided up into three categories, each with five easy to apply tips. General Maintenance applies to computers in general and not just laptops, Battery Maintenance will help you get the longest life out of your laptop’s battery, and Laptop Common Sense will have you kicking yourself for not already following the tips when all along you knew you should.Oh, and almost nothing on this list will cost you anything.

General Maintenance

1) Use Anti-Virus/Anti-Spyware SoftwareMost laptops ship with at least some sort of anti-virus Software like Norton or McAfee, but these frequently expire after a short time. Viruses and spyware can be crippling to a computer, and have a tendency to build up over time and get worse. Running weekly scans can nip these problems in the bud. If you don’t feel like ponying up for a paid subscription service, there are plenty of free ones, such as AVG.

2) Keep Your Laptop Up To DateYour computer was up to date when you bought it, but unless you’ve set up regular updates that was the last time. Beyond your anti-virus software, which should be kept up strictly, both Microsoft and Apple offer regular updates for their operating systems to correct bugs and plug up vulnerabilities. Updating your software regularly will help keep your laptop in working order and stop many problems before they can threaten the usability or potentially the life of your computer.

3) Defragment Your Hard DriveWhen you save something on your computer, it gets physically written on a portion of your hard drive. As time goes on and your hard drive fills, this storage becomes somewhat disorganized, and your hardware must work harder and spend longer to find data. Defragmenting your hard drive rearranges the data into an organized structure. Defragmenting regularly will extend the life of your hard drive as well as make everything on your computer run just that much smoother.

4) Keep 5-10% of Your Hard Drive EmptyBy the time you’ve had your laptop for a few years, your hard drive will seem impossibly small. It’s important, however, to keep at least a small percentage of your hard drive empty at all times. Operating systems use a portion of your hard drive space for Virtual Memory, and if you don’t leave them any room your computer will slow down tremendously, potentially overheating or crashing under the stress. Key life-extending features like System Restore require empty space to function as well.

5) Use a Surge Protector When ChargingThis probably belongs in the common sense section below, and the reason for it should be obvious. Surge protectors help protect your computer from an electrical surge in your socket, such as might come from a bolt of lightning or a large appliance turning on. Without this, your laptop is vulnerable to being short-circuited and could fry after any surge. Surge protectors are extremely cheap and can be useful too, as most have multiple outlets.Bonus- personal preference 5+) Use Older SoftwareOften software will come out with a new version that is just the same thing with more graphics, which can be a drain on an older computer. For non-essential items like chat programs and the like, sometimes using an older version can help your computer run smoothly and error free. If you want to try this, check out http://www.oldversion.com, a great free resource for this.

Battery Maintenance

1) Charge Fully, Your First Time And Every TimeWhen you open your new laptop for the first time, it’s always a temptation to turn it on and begin playing with it. Resist this temptation! Proper conditioning of your battery by charging it fully before its first use and then discharging it completely and repeating once or twice ensures that your battery’s capacity starts at its highest. Your battery also has a preset number of charges/discharges, so it’s important to charge/discharge fully to extend the life of your battery too.

2) Avoid Battery Memory EffectBattery memory is what causes your laptop to stop charging before the battery reaches 100%, or to turn off before it reaches 0%. This is caused by not charging your battery fully or not discharging it fully – the battery “remembers” where it stopped charging/discharging and doesn’t go any further. Modern Li-Ion batteries are thankfully not subject to this, but if you’ve got an older battery avoid this effect at all costs. It can render a battery frustratingly useless.

3) Store the Battery Partially ChargedIf you’re not going to be using your laptop for an extended period of time, it’s a good idea to remove the battery and store it. Batteries discharge slowly over time, but storing a battery fully charged/discharged can permanently damage the battery by causing it to lose capacity or worse, go entirely dead. Charging the battery to 40% minimizes the negative long term effects of storing.

4) Use the Battery At Least MonthlyIt’s important to keep your battery in good condition through occasional use. If you typically use your laptop plugged in, you are not using your battery, and this can cause the capacity to shrink. At least once a month, your battery will benefit from a full charge/discharge cycle. This keeps the battery stronger, the capacity fuller, and helps its overall longevity.

5) Avoid Extreme TemperaturesYour battery was designed to work at a certain temperature, and it’s completely normal for it to heat up a little during use. Subjecting your battery to extreme temperatures it’s not prepared for can damage its life. Cold temperatures are not good for it, but excessive heat is the real battery killer. Simply making sure not to leave your laptop in your car during the summer could save you from buying a new battery the next day.Bonus tip 5+) Daily Use TipsThe above tips will help keep your battery in good shape, but there are tons of things you can do to cause your computer to consume less energy. Dim the LCD, mute the speakers, turn off features like WiFi if you’re not using them, make use of the power settings and be sure to use both hibernate and standby where appropriate. This is only a start, but using as little power as possible while operating on batteries can help you squeeze some extra time out of your battery’s capacity.

Laptop Common Sense

1) Take Care of the LCDLCDs on laptops are designed to outlast the usefulness of the laptop they’re connected to, but can be easily damaged by a simple careless mistake. Don’t lift the laptop up by the display (it will bend) and be easy on the hinges. Only clean the display with something soft and never store anything under the LCD when its closed. These precautions seem obvious but you basically need only treat the LCD with care and it will last for as long as you need it to.

2) Take Care of the KeyboardLike the displays, with proper care a keyboard should easily outlast the life of the laptop, but a silly accident can render it useless. Many laptops today are “spill resistant”, but I wouldn’t recommend testing it – don’t drink around your laptop. Don’t eat around it either, as crumbs or grease can fall between the keys and cause malfunctions. Hit the keys gently and dust them once in a while and your keyboard should last year after year.

3) Be Aware of TemperatureExtremes in temperature can be extremely dangerous for a laptop. I mentioned that heat is a battery killer, but the display can be damaged by extreme conditions as well. Using the laptop when the environment is too hot can cause failures from overheating, and using it in an environment that is too wet and humid can cause similar malfunctions. Modern rugged laptops excluded, your laptop is meant to be used on a desk in your home or office. Keep it somewhere temperature controlled and this will never be a problem.

4) Watch Your FanYour fan is responsible for cooling your CPU so that it doesn’t overheat in normal conditions. A large number of problems related to overheating are solved simply by moving the laptop to a new position where the fan’s exhaust is not blocked. Even if there is nothing large obstructing it, it’s important to make sure dust doesn’t build up in the fan as that can cause overheating too. Make sure your fan is clear to fan away excess heat and your laptop will live longer, guaranteed.

5) Protect Your Laptop From Jolts With a CaseLaptops are sensitive instruments, and they are never more vulnerable than when they are traveling. Constant bumping and shaking can cause parts to shift and can permanently damage the laptop. Using a cushioned laptop bag will preserve it from the shocks of travel, and storing it in a laptop bag when not in use can help prevent any number of accidents. This is virtually the only item in the list that isn’t free, but it’s a small price to protect your computer and the bag can last for a lifetime of laptops.Bonus – personal preference 5+) Use External PartsUsing external hardware, such as a monitor, hard drive, keyboard, mouse, speakers, etc., can help extend the life of your internal hardware by preventing wear and tear. At the same time, it can provide a more comfortable experience at home. While this can be expensive, if you regularly use your laptop you may find the investment worth your while.

(Of course, if we’re spending money, buying new RAM and occasionally replacing the battery can also do wonders for your performance and overall enjoyment of the laptop as well. But that’s another article.) Follow these simple tips and you easily will extend the life of your laptop.

6 Essentials of Buying a Personal Computer

The Internet has been one of the big reasons why people go out and buy a new computer. The problem is, having decided to buy a PC; you are usually swamped by hundreds of choices and options. What computer do you buy? How much memory do you need? All these questions seem too much to deal with sometimes.

Let’s discuss the essentials of buying a PC. Let’s look at what’s out there and how you can benefit from the difference choices available.

The basics
CPU – On the top of the list is the computer’s brain known as the CPU or Central Processing Unit. If you have the right budget, you should consider high Intel Pentium processor. The higher the capacity, the better. This should have sufficient power for a home PC. If Intel processors are too expensive for you, look for AMD or Cyrix chips which offer a similar performance at a lower price.

Memory – The rule of thumb is, the more RAM (Random Access Memory), the better. The computer’s memory works faster especially if you are running a lot of simultaneous programs or planning to work with a lot of graphics or big spreadsheets files. These days, PCs usually come with a standard 128 megabytes of RAM, which is enough for minimal computing. Unfortunately, the way computers and their programs are being developed, what is enough today will be found lacking tomorrow. Thirty-two megabytes may not be enough in six months to two years down the line, which will force users to spend for upgrades. If you are purchasing a new PC, you may want to add more RAM from the onset. Sixty-four megabytes are a lot and will turn your system into a true performer.

Buy a PC

Buy a PC

Monitor – Computer monitors have evolved dramatically from the time when they were unfriendly green screens on black boxes. Since the monitor is one part of the PC which you are most in contact with, it should be given the proper consideration. If you are buying a new system, it will probably come with the usual 14” or 15” inch boxes, which are okay for starters. If you intend to surf the Web or watch movies on your PC, you may want to look into the new 17” inch models which are now widely available and which your eyes will be eternally grateful for. Most monitors are okay for general purposes, but for computers which are to be used for designing or publishing, a high performance 21” inch set is ideal, although they sometimes cost as much as the computer itself.

Hard drive – The hard drive is the PC’s main storage. All your programs and all your files should fit into this drive. Current PC models are usually bundled with 4.5 gigabyte drives which are huge and should be able to hold most of our information for a number of years. Most HD’s are similar in quality despite the brand. The only question really is the HD’s capacity. You should not settle for anything less than 10 gigabytes.

Floppy drive – In the past, you needed the 5 inch and 3 inch floppies to load programs and for storing your files. These days, most programs are loaded through CD ROM drives and floppies are kept merely for making back-ups or for copying files between computers. The 5-inch floppies are virtually ancient and are really not very useful anymore. For users who need more storage space, another solution is an external ZIP drive or removable flash drive.

Personal Computer

Personal Computer

CD ROM – The CD ROM is just like your CD player except that t can read data and input information into a computer. With a CD ROM player, you can play music, watch CD videos, and play games and copy programs from CDs. As with most things pertaining to PCs, more and faster the better. Just remember that for your PC to play music you will also need a sound card to work with the CD ROM. Sound cards are usually offered as standard items but it is always safer to make sure it is included.

See what Windows Update history you have installed on your computer




Sometimes when you install a Windows update a problem occurs and you might need to see the Windows update history. The Windows update history will show you what updates have been installed on your computer. It will also allow you to remove un-wanted updates.

How to open Windows Update in Windows XP and Windows Vista?

There are two ways to open Windows updates. The first way is to double click on the icon in the notification area. This icon will be noticeable when there are updates for your computer to download.

This screenshot shows the icon in the notification area in Windows Vista. In Windows XP the icon is a yellow triangle with a exclamation mark.

The other way to get to Windows Updates is to go to the start menu, then choose control panel, then double click on the automatic updates icon.


How to view your Windows Vista update history?

After you have opened the Windows Update window, as shown in the screenshot below, you can now proceed to view the update history. Simply Click on the link that says View update history.

Windows update history

Now you will see a list of Windows Updates that have been installed on your computer as shown below.

How to Uninstall a Windows Updates on Windows Vista?

To remove a Windows update, when you are viewing the update history, click on the link Installed Updates.

Update history - newsletter

Below is a screenshot of Installed updates on Windows Vista. Now you can select an update by making it blue. Then an uninstall button will appear next to organize and view.

uninstall an update - computer tips and tricks

How to see what Windows Updates you have installed on Windows XP?

There is no update history for Windows XP, however you can see what updates you have installed on your computer by going to Add or Remove programs in the control panel.

  1. To see what updates you have installed on a Windows XP computer you need to go through a different process.
  2. Go to the start menu at the bottom left corner.
  3. Choose control panel from the menu.
  4. Find the Add or Remove programs icon and double click on it to open it.
  5. A list of installed programs will appear. To see Windows updates put a tick in the box next to Show updates.
  6. Now you will also see all of the updates that are on your computer.

How to uninstall a Windows Update on Windows XP?

To uninstall a Windows update from your Windows XP computer you must follow the steps above to see the updates that are on your computer. Then select an update and choose to remove it.

23 High Quality Best Hacking Videos

Grab this Free Computer Tips Tricks : 23 High Quality Best Hacking Videos. Remeber that this computers tips tricks for hacking is only for learning purpose only. So if you want to be a great hackers this video tutorial is a awesome source. happy download.
Free Computer Tips Tricks- 23 High Quality Best Hacking Videos description:

All set of 23 videos showing how to hack.

Part 1
Siffing Remote Router Traffic via GRE Tunnels (Hi-Res)
Buffer Overflows Pt. 3 by IDESpinner
Buffer Overflows Pt. 2 by IDEspinner

Part 2
Breaking WEP in 10 minutes
DoS attack against Windows FTP Server
How to sniff around switches using Arpspoof and Ngrep!

Part 3
Buffer Overflows pt1
Feauture Addition pt 1
Feauture Addition pt 2
DNS Poison Routing
Install VNC Remotely!
Internet Explorer Remote Command Execution Exploit Client Side Attack (Hi-Res)
Internet Explorer Remote Command Execution Exploit Client Side Attack (lo-Res)
MITM Hijacking
Sniffing logins and Passwords

Part 4
Sniffing Remote Router Traffic via GRE Tunnels (lo-res)
A Penetration Attack Reconstructed
Telnet Bruteforce
Tunneling Exploits through SSH
Bluesnarfing a Nokia 6310i hand set
Start a session and get the interactive commandline access to a remote windows box!
Use Brutus tohacks a box running telnet!
Cain to ARP Poison and sniff passwords!

Free Computer Tips Tricks : 23 High Quality Best Hacking Videos download link :

http://rapidshare.com/files/230253348/23__Highquality__Best_Hacking_Videos.tahaa.part1.rar
http://rapidshare.com/files/230274757/23__Highquality__Best_Hacking_Videos.tahaa.part2.rar
http://rapidshare.com/files/230310723/23__Highquality__Best_Hacking_Videos.tahaa.part3.rar
http://rapidshare.com/files/230348835/23__Highquality__Best_Hacking_Videos.tahaa.part4.rar
http://rapidshare.com/files/230351409/23__Highquality__Best_Hacking_Videos.tahaa.part5.rar

Basic Microsoft Excel - Free Computer Tutorials

Excel is a spreadsheet application from Microsoft and is the most popular of its type in use today. A spreadsheet is used for capturing, displaying, and manipulating data arranged in rows and columns. Spreadsheets can be used for record keeping, performing calculations of data, charting or graphing data and many other uses. Some people even use them to make chore or grocery lists! This tutorial will be based on Excel 2000 which is pretty much the same as using Excel 97, XP and 2003.

Before staring your spreadsheet it’s a good idea to figure out how you are going to lay out your information. You don’t want to enter in your data and then realize you want it displayed differently and have to do it over again. The information will be laid out in an X and Y axis format using rows and columns. You can have header/title information along the top row if you would like to define the data in the columns.

Excel has many of the toolbar items and menus as other programs such as Microsoft Word such as File, Edit, and View etc. Many of the submenus are the same as well.

An Excel spreadsheet consists of rows and columns of cells. Cells are what contain the information you are going to be using. You can enter data such as dates, time, numbers, text and so on. To enter data simply click on the cell you want to input the data into and start typing. To go to the next cell you can use a variety of methods. You can use the mouse to click on the next cell, press Enter to do down, Tab to go across or use the arrow keys to move around any direction.

If you need to add more worksheets to your file you can click on the Insert menu and then on Worksheets. If you want to rename your worksheet double click on the worksheet name tab on the bottom of the sheet and type in a new name. You can also drag the worksheets around if you want to change the order that they appear in the file.

Formatting Data
Once you enter data you can format it or delete it if you don’t want it there any more. Just click on the cell or cells you want to change to highlight them and you can format them just like a Word document by making them bold, underlined, centered, a different color and so on. To highlight multiple cells you can use the standard Shift and Ctrl methods that Windows uses for selecting multiple items. You can also click on the grey row or column number itself to highlight the whole row or column.

Here you can see a typical spreadsheet with various data filled in the cells. As you can see the data is categorized at the top of each column making it easier to understand what information is in the spreadsheet. This sample has text, numbers and dates for Information.

You can do special formatting of the cells depending on what type of data you have in the cells. For example for the date column you can have the date displayed in a variety of formats. To format a cell or group of cells simply highlight the cells then click on the Format menu then click on Cells. Then pick the type of formatting you want to use from the Category list and then select how you want the data displayed from the Type list.

From this section you can also change other formatting such as the font, cell borders and lock or hide the cells under the Protection tab.

Excel allows you to insert and delete rows and columns in your spreadsheet as needed. To insert a row or column right click on the row number or column letter that you want to insert next to and select Insert from the menu. To delete a row or column right click on the row number or column letter that you want to delete and select Delete.

To make your data easier to read you can add borders and color fills to your cells so they stand out better. To add borders highlight the cells you want to add borders to and click on the Borders toolbar button to select what type of border you want to use. To add a fill highlight the cells you want to fill and click on the Fill Color button to select a color for your fill.

Sorting Data
If you need to change the order of your data or the way that it is displayed then you can do what is called a sort. Sorting Data allows you to group the information in different order to make it easier to read. For example you can sort by number high to low or low to high or sort alphabetically from A to Z or Z to A and so on. As you can see in our example the Resumes Submitted column has been sorted numerically from lowest number to highest. Notice how all of the other data has changed as well to follow the new order. We want to keep the other columns in line with the Resumes Submitted column so the data doesn’t get mixed up.

To sort your data highlight all of the columns with data that needs to be kept together in order and click on the Data menu and then pick Sort.

Then click on the drop down box under Sort by to select which column you want to sort by. You can select 2 other columns to sort by as a secondary sort.

Charting Data
Excel allows you to make charts and graphs representing your data to make it easier to understand. To make a chart simply highlight the data you want included in the chart and click on the Insert menu and then on Chart.

From the Chart Wizard you can select what type of chart you want to use to display your data and go through the steps to make the chart. Then you can choose to have it displayed on the same worksheet as your data or in a worksheet by itself.

Saving and Printing Your Spreadsheet
After you have finished entering your data and formatting your spreadsheet you may want to save it for use later or print it out for various reasons.

To save your spreadsheet simply click on the save icon or click on File menu and then on Save. Choose a name for your file and location where you want to save the file and click the Save button.

Before you print your spreadsheet you may want to check out the print preview to see how it will print before getting any unwanted surprises. Click on the File menu and the on Print Preview. If anything looks off or is not fitting on the page properly then you can make adjustments before printing. One option you may end up using is under the File menu and then Page Setup. Here you can have your whole worksheet forced to fit on one page so it doesn’t run over onto other pages.

Sharing secrets

An old registry tip from Microsoft Technet articles that is very useful in everyday Geek computing.

If you open CMD and go to a directory, e.g. cd\windows, instead of typing the complete word "windows" type "win" + TAB. It will automatically search for the word and display the first value.

Registry Settings
Quote:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Command Processor

HKEY_CURRENT_USER\Software\Microsoft\Command Processor
So, Which is being followed by the current Logon User? CompletionChar = 9 by HKEY_CURRENT_USER


Scanning the Integrity of All Protected System Files

Windows Vista is still accessible but some programs are not working properly, very slow, it stops responding and sometimes hangs. Maybe some System files has been modified.

Run the following commands:

sfc /verifyonly - Scans integrity of all protected system files. No repair operation is performed.

If there is an error message occurs, repair all the affected system files by running

sfc /scannow - Scans integrity of all protected system files and repairs files with problems when possible.

How to Open Network Connections Window easily

Despite Microsoft is making networking much easier in Windows Vista, they made it very difficult to open your network connections list or Window. Here's a quick solution:

type ncpa.cpl and press enter. That's it!!!

*I have another. To put a shortcut of Network Connection window on desktop,
Create a folder called

Network Connections.{7007ACC7-3202-11D1-AAD2-00805FC1270E}

Kill 'Em All
Metallica? Nope...
Got tired of closing all applications one by one. Especially those unstable ones! Here's a Tip to Kill 'Em All at the same time. e.g. Internet Explorer, Firefox, Windows Media Player...

Method 1
This is the easiest method but it's limited: PressCTRL >Click the Programs in the Taskbar >Right-Click >Close Group. That's it!

Method 2

1. Open the Notepad and Task Manager (Ctrl-Shift-Esc)

--------------------------------------------------------------------------------------------
Adding Entries to Computer, Internet Explorer, Network and Start button Context Menu (Right-Click Menu)

How? Just Open WinBubble > Miscellaneous Tab > Choose and click which button you'll use > Type the name of the application and locate the program by clicking the Browse button. That's it!

Note: In Internet Explorer, Permission must be set first and the added Entries will become the default application that will open instead of IE.

Manually Adding the Entries (Windows Vista and XP):

1. Open the Regedit.exe and expand the HKEY_CLASSES_ROOT

2. These are the location of Context Menu Customization settings:

Computer: CLSID\{20D04FE0-3AEA-1069-A2D8-08002B30309D}\shell
Internet Explorer: CLSID\{871C5380-42A0-1069-A2EA-08002B30309D}\shell
Network: CLSID\{F02C1A0D-BE21-4350-88B0-7367FC96EF3C}\shell
Start Menu: Directory\Shell

3. Create a folder inside the path above. The folder name is the one that will be seen in the context menu.

HKEY_CLASSES_ROOT\CLSID\{20D04FE0-3AEA-1069-A2D8-08002B30309D}\shell\Open WinBubble

4. Add another folder named "command", double click "(Default)" and enter the location of the file. You can use a command-line parameter or switch in executing the application.

HKEY_CLASSES_ROOT\CLSID\{20D04FE0-3AEA-1069-A2D8-08002B30309D}\shell\Open WinBubble\command

Enjoy!

--------------------------------------------------------------------------------------------
Simple Ways to Tweak your Network and Internet Connections

"WinBubble will start the idea of simplicity combined with knowledge. Everyday, WinBubble features will be explained and dig"

There are many ways to enhance and speed up your Internet Connections: upgrade your Internet access service to a much bigger bandwidth or find another provider which speeds up everything, find the nearest node (for DSL lines), upgrade your networking equipment, and by performing some tweaks that offer ways to potentially enhance your network connections in Windows Vista.

According to Microsoft, "WinInet limits the number of simultaneous connections that it makes to a single HTTP server. If you exceed this limit, the requests block until one of the current connections has completed. This is by design and is in agreement with the HTTP specification and industry standards."

WinFlog

Turns-OFF your monitor instantly by Adding "Monitor OFF" in the Computer Icon and Desktop Context Menu (Right-Click Menu).




Turning Off the Monitor when not in use saves electricity and prolong your laptop battery which is not the same as setting a Blank Screensaver.

Tips and Tricks: Creating an Icon in the Quick Launch Toolbar and Desktop or a shortcut Key is very easy. Just create a shortcut of the file "WinFlogTurnOff.exe" and drag it onto the Quick Launch Toolbar.

Features:

- Adds "Monitor OFF" and "Turn Off Monitor" in the Computer Icon and Desktop Context Menu (Right-Click Menu) respectively.

- Adds "Turn OFF Aero" and "Turn On Aero" in the Computer Icon Context Menu (Right-Click Menu).


WinGuggle is a small application that can get your Windows Vista Product Key easily. No Installation is needed, Just unzip the archive and launch the application.

Features:

*Get Windows Vista Product Key (CD Key)
*Change OEM Logo and Information
*Change Performance Information and Tools OEM Logo

-----------------------------------------------------------------------------------------------------
Thank you NotebookReview Community who supported me in the beginning. By giving an opportunity to connect to other user's comments and demands. and allowing me to post my ideas.

Download Winbubble




2. Hack your WEI scores!

WinSAT saves the scores in a XML file located in the Windows\Performance\WinSAT\DataStore folder. Each time you perform benchmarking using WinSAT, it creates a new XML file and stores it in this folder. All you have to do is to open the latest XML file and edit it using WORDPAD.

Fun stuff: Modify your WEI score and show it to your friends just for fun.

CONS: Computer stores may trick their customers by editing the WEI scores. So, be careful! Always, check them by Re-running WinSAT.
-------------------------------------------------------------------------------------------------------
NEW
here: YouTube Hack!
Get the Youtube direct download link without using any website or windows application.

1. Go to the Youtube video that you want to download. and Right Click to the vacant space->View source

2. Press CTRL+F, and type "watch_fullscreen?"

3. Copy the next String starting from "Video_id=...." up to "title" only, no more "=" character at the end.

4. Direct Download link:

http://www.youtube.com/get_video? + COPIED string
---------------------------------------------------------------------------------------------------------
8. Windows Vista Benchmarking tool
WINSAT evaluates various features and capabilities of a computer running Windows Vista
8.1 3D benchmarks (WOW...)
a. In the command prompt(RUN as administrator), type "winsat aurora"
b. Winsat D3D, evaluates a computer system ability to run D3D based applications such as games.
Note: Run the command prompt as administrator and type the following
Example: winsat d3d -alushader -texshader -totalobj 12

8.2 Aero benchmarks:
Winsat DWM, evaluates computer system ability to display the Aero desktop effects.
Note: Run the command prompt as administrator and type the following
Example: winsat dwm -normalw 8 -glassw 3 -time 6 -fullscreen

8.3 Hardisk Benchmarks
WINSAT DISK - evaluates the performance of a storage device
Note: Run the command prompt as administrator
a. Sequential I/O read performance of drive C:
winsat disk -seq -read -drive c

b. Random I/O write performance of drive number
winsat disk -ran -write -drive c

c. flush performance of drive C:
winsat disk -flush -drive c

8.4 CPU Benchmarks
Winsat CPU - evaluates the performance of the processors using encryption and decryption or compression and decompression

Examples

a. Run the encryption and decryption sub-assessment computing a SHA1 hash

winsat cpu -encryption2

b. CPU performance using the same compression algorithms that Windows Vista uses internally, same algorithm used to compress the hibernation file and with ReadyBoost and ReadyDrive technologies

winsat cpu -compression2
--------------------------------------------------------------------------------------------------------

1. Hidden Windows XP Serial Key
I just want to share it to all of you guyz. If you have some please share it also.
I just found a file in windows installer that automatically input the serial during windows installation. the 'winnt.sif' that is located on i386 folder.
-----------------------------------------------------------------------------------------------------------
2. I noticed that when you buy a new laptop, some of them, the desktop icons are too large and not proportional to its taskbar and startmenu. To change, press CTRL key and scroll your mouse down and up. Choose the size that is proportional and comfortable with you.
------------------------------------------------------------------------------------------------------------
3. disable writing in usb drives works in Windows Vista and XP

HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\StorageDevicePolicies
WriteProtect=dword:00000001

-----------------------------------------------------------------------------------------------------
4. Automatic Running as "Administrator":
In the search box type "cmd",PRESS CTRL+SHIFT+ENTER.Now you can use the command shell as ADministrator.
------------------------------------------------------------------------------------------------------------
5. Hiding your computer in the network
open the command prompt as administrator, Please see the tip above. In command prompt "Net config server /hidden:yes", hides your computer in the network.
------------------------------------------------------------------------------------------------------------
6. NETPLWIZ

Login Automatically in Windows Vista,

Secure Logon is a common feature of office computers on a domain network which guarantees an authentic login prompt, protecting the system from programs that mimic a logon to retrieve password information.

Enable Secure Logon in Windows Vista

Type netplwiz in the Run window (Windows+R) or Start Menu’s Search box.
Click "Continue" button if UAC is turn on. In the Advanced User Account window, click the Advanced tab.
Select the Require users to press Ctrl+Alt+Delete check box.

Enable Secure Logon in Windows XP

Go to Start menu-> Control Panel (Classic View) -> User Accounts
In the Advanced User account window, click the Advanced tab.
Select the Require users to press Ctrl+Alt+Delete check box.

Add/Edit Network Passwords: Advanced tab->Manage Passwords
--------------------------------------------------------------------------------------------------------------
7. F11 - Put explorer into Fullscreen mode, this works also in internet explorer...
--------------------------------------------------------------------------------------------------------------

9. Microsoft Desktop Window Manager is responsible for the Aero effects in our Windows Vista machine.

Recently, I read a Windows Vista Tip on how to create a Flip 3D shortcut, maybe almost all of the Vista forums, Windows Vista Tweaking guides and Windows Vista Tips and tricks websites has this tip. I was amazed about the tip...because you can create an application that if you click the middle part of your mouse (scroll wheel button), Flip3D will execute. WOW!

One question pops-up in my head, how about the other commands? After experimenting with it, I found 3 functioning parameters.

Activate Flip3D: Rundll32 dwmApi #105

Turn off the Glass style effect: Rundll32 dwmApi #104

Turn on the Glass style effect: Rundll32 dwmApi #102

Note: Run the command prompt as Administrator

I search for a Vista Tip/Blogs/Articles like this (Aero Off and On) but I didn't found any, maybe this is the FIRST. I hope so. hehehe...here's a guide on how to create a shorcut using these commands.

Vista Tricks

Solution to the missing “Up” button in Vista’s Windows Explorer

I started using Vista when it was RTM well over a year ago. Currently, I use XP Pro on my home desktop and Vista Ultimate 64bit on my laptop. All in all, I’ve had no issues. But one continued to bother me. When using Windows Explorer, the “Up” button was missing. On XP, I used this all the time. It was quite handy.

Most of the time you can just click the folder name in the address bar to go up one folder. But sometimes, like when you’re in folder on your desktop, you have to manually edit the location in the address bar. Kind of a pain.

I figured it was some setting that I had to modify rather than using the default, but never bothered to look for it. After some searching, I found two ways around this problem. I prefer the first. :)

1. It’s so simple. Use ALT + Up Arrow. Genius. ;) This shortcut didn’t exist in previous versions of Windows.

2. Go to MavisApps and download the Mavis Up Button for Vista. ($4.95 with a 5 day trial.) I didn’t give this a try as option 1 is sufficient, but if you do, let me know how it turns out.

Vista: A program needs your permission to continue

If you’ve recently switched to Vista, you’re probably aware of the really annoying prompt asking you if you really want to continue every time you’re making a change, installing a program, breathing, moving your mouse… (If you’ve got some time, check out the really funny Mac commercial making fun of MS due to this “feature”.)

Vista User Account Control Nag Screen

Well, the good news is, you can turn it off. The bad news is, if you’re not technically savvy at all, I wouldn’t recommend it. A general rule of thumb I would say is if you know what C:\windows\system32 is (and don’t say “a folder”), you can probably go ahead and turn it off.

1. Open Control Panel.

2. Open the Security Center.

3. Click “Change the way Security Center alerts me” (on the left)

4. Click “Don’t notify me and don’t display the icon (not recommended)

Don’t notify me!

Customize your quick access toolbar in Office 2007

Customize your quick access toolbar in Office 2007

Did you know you can add just about any command to to the quick access toolbar in Office 2007?

Quick access toolbar, Office 2007

There are a few items I like to have at my disposal when working in Word and Excel. The Print Preview command is very nice and convenient, as well as the “Switch Window” command when working in Excel (when Alt-Tab won’t do). Here’s how you do it.

Click on the small down arrow to the right of the quick access toolbar. You’ll see a menu. You can easily add one of the most common items by choosing one from the list. If you don’t see the one you need, click “More Commands”.

Quick access toolbar, more commands

Now you can select anything from the left box, click Add, and it will add it to the right box. The right box lists all the items in your quick access toolbar. If you still don’t see what you’re looking for, open the drop-down menu under “Choose commands from:”, and you can select “All Commands”.

You can also rearrange your quick access toolbar and place the shortcuts in the order you choose by selecting an item from the right window, and then clicking the up or down arrow (on the right) to move it.Once you’re done, click OK. That’s it!

Win XP

Control Inactive System Tray Icons

You don't have to hide or show all the icons in your system tray—you can control their disappearing acts. Right-click on the taskbar and select Properties. Click on the checkbox next to "Hide inactive icons" (if it's not checked by default), then click on the Customize button. For each item on this list, you can choose "Hide when inactive," "Always hide," or "Always show" options to decide what you'll see and when.

Fit More Icons on Your Desktop

If your screen is so cluttered with Word documents and program shortcuts that you can't see the rolling meadows of your wallpaper, you don't need to move piles of stuff to the Recycling Bin. Just change the amount of space between icons. Right-click on the desktop, select Properties, then click on the Appearance tab, and click the Advanced button. In the "Item" drop-down, scroll down to Icon Spacing (Horizontal) and Icon Spacing (Vertical); changing the value in the "Size" field will move icons closer together (while increasing the number will move them farther apart). When you're done, click OK. To make your existing icons follow these rules, right-click on the desktop, select "Arrange Icons By" and then click Align to Grid, then go back to the same menu and click "Auto Arrange."

Shut Down from Your Desktop

If you're trying to eliminate every extraneous mouse click, you can shut down your computer with an icon on the desktop. Right-click on your desktop, click "New," and then click "Shortcut." In the "Type the location of the item" field, type "shutdown -s -t 00" to give you a way to shut down the computer immediately. (Change the -s to -r to create a reboot shortcut instead.)

Change What Programs Start When Windows Does

You can prevent a lot of apps forcing Windows into chilled-molasses boot times—without uninstalling anything. Click Start, then "Run...," and type msconfig. This brings up the System Configuration Utility window. Click on the Startup tab to see a list of all the apps slated to start when you boot up Windows. Click the check mark next to any you don't want, and then click OK to save your choices.

Type With an Onscreen Keyboard

Whether you have trouble with your hands or you just prefer using the mouse, typing with Windows' onscreen keyboard can be a great convenience. Navigate to Start > All Programs > Accessories > Accessibility, and click "On-Screen Keyboard." Click OK to clear the dialogue box and then start "typing"—you can even change the settings to "press" keys just by hovering your mouse over the letter you want (enable this feature by selecting "Typing Mode" from the Settings menu).

No-wait Screen Savers

Don't want to wait for your screen saver to kick in? Create a shortcut to it just as you would for any other program by hitting Windows key + F to search your computer and click on "All files and folders." Type "*.scr" in the "All or part of the file name" field to find every screen saver file on your computer. In the resulting list, right-click and drag the screen saver you want to your desktop. Whenever you want it to start, just double-click its icon.

How to Become a Gmail Jedi Master

yoda-gmail-master






Learn to master Gmail through the use of labels, filters, keyboard shortcuts, vacation autoresponders, and the new IMAP support.One of the most useful features in Gmail is its powerful search feature. They have incorporated the ease and functionality of Google search into Gmail, allowing you yo search for specific emails based on the Sender, subject line, date, or the actual content of the email. However, Gmail has gone one step further with what they call filters and labels.Creating Labels in Gmail

Labels are much like folders, but with an added bonus: you can add more than one label to a conversation. This way, if a conversation covers more than one topic, you can give it multiple labels. It’s kind of like applying tags to your del.icio.us (and other social bookmarking) favorites. Once you have created a label for any particular email, you can then easily locate all the messages within that label.

Gmail also allows you to apply different colors to your labels. So, for example, you could apply a red label with the word “Important!” for emails coming from your colleagues or your manager. If you receive newsletters, you could give them a green label with the name of the newsletter. If you’re a business, you could apply blue labels to email from clients. The list of possibilities are endless.

To create a label you simply,

1. Select the message(s) you’d like to label by checking the box(es) next to the sender’s name.
2. Select “New label” from the More Actions… drop-down menu.
3. Enter the desired name of the new label in the text box and click OK.

To change the colors of your labels, you will first need to locate your listing of labels on the left-hand side of the page. In your Labels list, click the square to the right of a label. A color palette opens, allowing you to the select the colors of your choice.

Step-by-step instructions on creating labels are given in the video above.

Creating Filters in Gmail

Filters allow you to automatically organize your incoming messages as you receive them. By using filters, you can automatically label, archive, delete, star, or forword your mail to friends or colleagues based on any combination of keywords, subject lines, senders, and even words within the email.

To begin creating a filter, click on “Create a filter”, to the right of the search box at the top of the page. Enter your filter criteria into the appropriate fields. In most cases, you will be using the From and Subject lines to filter your emails.

Once you have filled in your filter criteria, you can then click on “Test Search” to see which messages currently in your account match your filter terms. If you are happy with the results, click on Next Step. The next form will allow you to select the action you’d like to take on messages that match the criteria you specified. Here you can choose to archive the email, mark as read, star it, apply a label, forward it to another email address, or delete it.

You can also create filters from within messages. Whenever your reading an email that you would like to apply a filter to, simply click on the drop-down menu next to Reply and select Filter messages like this. Enter your filter criteria and follow the same steps from above.

Step-by-step instructions on creating labels are given in the video above.

Now for one of my favorite features, keyboard shortcuts…

Learning the keyboard shortcuts is essential to becoming a Gmail Jedi Master.

Some of the most popular ones are…

Press “c” to compose a new message.

Press “j” to move to an older conversation.

Press “k” to move to a newer conversation.

Press “s” to star a message.

Press “Y” to automatically remove the message or conversation from your current view and place it in the archive.

Press “r” to reply to the message sender.

Press “#” to move the conversation to the trash.

Here’s a complete list of Gmail keyboard shortcuts.

Gmail Vacation Responder

I have found the Gmail Vacation Responder to be one of the most useful features within Gmail. Let’s say you’re going on vacation and you won’t have access to the Internet for a couple of weeks. No problem! You can simply set up an automatic vacation response that will inform them that you’re away Hawaii, Honolulu, New Zealand, or wherever. In fact, maybe you just want to unplug from technology for a while. The Gmail autoresponder will allow you to automatically send a reply to anyone who emails you while you’re on your sabbatical.

To create a vacation responder, click on “Settings” at the very top of the page on the right-hand side. Scroll down until you see the section entitled “Vacation responder”. Click on “Vacation responder on”. Next, type a custom message in the boxes provided to let others know that you are away on vacation. In your message, you may want to include when you will be back so they can get a better idea of when they can expect a response from you.

Click “Save Changes”.

Step-by-step instructions on creating labels are given in the video above.

Managing multiple email accounts with Gmail

If you’re like me, then you probably have multiple email accounts. Unfortunately, checking each one of those accounts on a daily basis can become quite time consuming. Fortunately, Gmail allows you to manage all of your email accounts from one interface.

To add another email address to your account, simply click on the “Settings” link at the top of the page and then select the tab labeled “Accounts”. Click on the link that says, “Add another email address”. From there, you simply enter your other email address and Gmail will send a verication to ensure that you’re the owner of that account. Add as many additional email addresses as you want and start managing all of your email from your Gmail interface.

This one simple feature has saved me a ton of time.

Sync your Gmail inbox with your iPhone, Blackberry, and more.

If you need Gmail on the go, you can use one of Google’s most recent features, IMAP, to snyc your inbox with your iPhone, blackberry or other handheld device.

Instead of showing you how to configure each client, I’m going to send you over to the Gmail Help Center, where they give step-by-step instructions for configuring a variety of different clients.

In addition to accessing your Gmail account with wireless devices, IMAP also allows you to access your email via a desktop application like Outlook or Thunderbird, allowing you to make changes across multiple platforms.

If you’re a Gmail junkie like me, you can learn more tips and tricks at a Google
Group called Gmail Power Users.

XP Tips

Win XP Won't Completely Shutdown

Go to Control Panel, then go to Power Options.
•Click on the APM tab, then check the "Enable Advanced Power Management support."
•Shut down your PC.
It should now successfully complete the Shut Down process.

Performance Increase Through My Computer

Easy enough tweak to usually find out about it on your own, but still, some of us
still don't find it right away. So here it is:
•Start > right-click on My Computer and select Properties.
•Click on the "Advanced" tab.
•See the "Performance" section? Click "Settings".
•Disable the following:

Fade or slide menus into view
Fade or slide ToolTips into view
Fade out menu items after clicking
Show Shadows under menus
Slide open combo boxes
Slide taskbar buttons
Use a background image for each folder type
Use common tasks in folders
There, now Windows will still look nice and perform faster.

Deal with System Hang at Startup

If your system hangs about 2 or 3 minutes at startup, where you can't access the Start
button or the Taskbar, it may be due to one specific service (Background Intelligent
Transfer) running in the background. Microsoft put out a patch for this but it didn't
work for me.
Here's what you do:
•Click on Start/Run, type 'msconfig', then click 'OK'.
•Go to the 'Services' tab, find the 'Background Intelligent Transfer' service.
•Disable it, apply the changes & reboot.

Turn Off System Restore to Save Space

Turn Off System Restore to Save Space when you are out of space on your operating system drive.

By default, Windows XP keeps a backup of system files in the System Volume Information
folder. This can eat up valuable space on your hard drive. If you don't want Windows to
back up your system files:
•Open the Control Panel.
•Double-click on System.
•Click the System Restore tab.
•Check "Turn off System Restore on all drives".
•Hit Apply.
•You may now delete the System Volume Information folder.
Warning! If you turn this off you will not be able to use Windows System Restore to
restore your system in case of failure.

How to Partition and Format a Master Hard Disk

IMPORTANT: If you use the following steps on a hard disk that is not empty, all of the data on that hard disk is permanently deleted. How to Partition a Master Hard Disk. To partition a master hard disk, run the fdisk command:
Insert the Startup disk in the floppy disk drive, restart your computer, and then use one of the following methods, depending on your operating system. For a Windows 98, Windows 98 Second Edition, or Windows Me Startup disk:
When the Microsoft Windows 98 Startup menu is displayed, select the Start computer without CD-ROM support menu option, and then press ENTER. At a command prompt, type fdisk, and then press ENTER.
For a Windows 95 Startup disk: At a command prompt, type fdisk, and then press ENTER.
If your hard disk is larger than 512 MB, you receive the following message:
Your computer has a disk larger than 512 MB. This version of Windows includes improved support for large disks, resulting in more efficient use of disk space on large drives, and allowing disks over 2 GB to be formatted as a single drive.
IMPORTANT:If you enable large disk support and create any new drives on this disk, you will not be able to access the new drive(s) using other operating systems, including some versions of Windows 95 and Windows NT, as well as earlier versions of Windows and MS-DOS. In addition, disk utilities that were not designated explicitly for the FAT32 file system will not be able to work with this disk. If you need to access this disk with other operating systems or older disk utilities, do not enable large drive support. Do you wish to enable large disk support?
If you want to use the FAT32 file system, press Y and then press ENTER. If you want to use the FAT16 file system, press N, and then press ENTER. For additional information about the FAT32 and FAT16 file systems. After you press ENTER, the following Fdisk Options menu is displayed:
1. Create DOS partition or Logical DOS Drive
2. Set active partition
3. Delete partition or Logical DOS Drive
4. Display partition information
5. Change current fixed disk drive
Note that option 5 is available only if you have two physical hard disks in the computer.
Press 1 to select the Create DOS partition or Logical DOS Drive menu option, and then press ENTER.
Press 1 to select the Create Primary DOS Partition menu option, and then press ENTER.
After you press ENTER, you receive the following message:
Do you wish to use the maximum available size for primary DOS partition?
After you receive this message, use one of the following methods, depending on the file system that you selected. For a FAT32 File System If you press Y for the FAT32 file system (in step 2) and you want all of the space on the hard disk to be assigned to drive C, press Y, and then press ENTER.
Press ESC, and then press ESC to quit the Fdisk tool and return to a command prompt. For a FAT16 File System.
If you press N for the FAT16 file system (in step 2), you can accept the default 2 GB size for the partition size, or you can customize the size of the partition. To accept the default partition size:
If you want the first 2 GB on the hard disk to be assigned to drive C, press Y, and then press ENTER.
Press ESC to return to the Options menu, and then view step d in the following "To customize the partition size" section. To customize the partition size: If you want to customize the size of the partitions (drive letters) on the hard disk, press N, and then press ENTER. A dialog box is displayed in which you can type the size that you want for the primary partition in MB or percent of disk space. Note that for computers that are running either Windows 98 or Windows Me, Microsoft recommends that you make the primary partition at least 500 MB in size. Type the size of the partition that you want to create, and then press ENTER. Press ESC to return to the Options menu.
To assign drive letters to the additional space on the hard disk, press 1, and then press ENTER.
Press 2 to select the Create Extended DOS Partition menu option, and then press ENTER.
You receive a dialog box that is displays the maximum space that is available for the extended partition. You can adjust the size of the partition or use the default size. Note that the default maximum space is recommended, but you can divide the space between multiple drive letters. Type the amount of space that you want, press ENTER, and then press ESC. The Create Logical DOS Drive(s) in the Extended DOS Partition menu is displayed. This is the menu that you can use to assign the remaining hard disk space to the additional drive letters. Type the amount of space that you want to assign to the next drive letter in the Enter logical drive size in Mbytes or percent of disk space (%) box, and then press ENTER. A table that lists the drive letter that you created and the amount of space on that drive is displayed. If there is free space on the hard disk, it is displayed near the bottom of the table. Repeat steps e through g until you receive the following message:
All available space in the Extended DOS Partition is assigned to local drives. After you receive this message, press ESC to return to the Options menu. To activate the partition from which you plan to boot (usually drive C), press 2 to select the Set active partition menu option, and then press ENTER.
When you receive the following message, press 1, and then press ENTER:
Enter the number of the partition you want to make active.
Press ESC, and then press ESC to quit the Fdisk tool and return to a command prompt, and then view the following "How to Format a Hard Disk" section in this article.
How to Format a Hard Disk
After you create the partitions, you must format the partitions:
Restart your computer with the Startup disk in the floppy disk drive.
NOTE: If you are using a Windows 95 Startup disk, a command prompt is displayed and you can skip to step 2. If you are using a Windows 98, Windows 98 Second Edition, or Windows Me Startup disk, select the Start computer without CD ROM support menu option when the Windows 98 Startup menu is displayed. When a command prompt is displayed, type format c: /s, and then press ENTER. This command transfers the system files and should only be used when you format drive C (or your "active" drive). For all other partitions, type format drive: (where drive is the letter of the partition that you want to format).
NOTE: If you receive a "Bad command" or "Bad file name" error message, you may need to extract the Format.com tool to your boot disk. To do this, type the following command at a command prompt, and then press ENTER. extract ebd.cab format.com. After the Format.com tool is extracted to your boot disk, type format c: /s t a command prompt to format your active partition, or type format drive: if you want to format a partition that is not your active partition. When you successfully run the Format.com tool, you receive the following message:
WARNING, ALL DATA ON NON-REMOVABLE DISK DRIVE C: WILL BE LOST!
Proceed with Format? Press Y, and then press ENTER to format drive C.
After the format procedure is finished, you receive the following message:
Volume label (11 characters, ENTER for none)?
NOTE: This is an optional feature that you can use to type a name for the drive. You can either type an 11-character name for the drive, or you can leave it blank by pressing ENTER.

How to Repartition and Format a Slave Hard Disk

How to Repartition a Slave Hard Disk
If you want to add a second hard disk (slave drive) to your computer, you need to make sure that the jumpers on both the master (original) and slave (new drive) are set according to the manufacturer's instructions first so that your computer can detect the hard disks. Verify that your hardware is installed correctly, and then follow these steps: Click Start, point to Run, and then type command (Note that the cmd command only works on Windows 2000-based computers). At a command prompt, type fdisk, and then press ENTER. The following menu is displayed:
1. Create DOS partition or Logical DOS Drive
2. Set active partition
3. Delete partition or Logical DOS Drive
4. Display partition information
5. Change current fixed disk drive
Note that menu option 5 is available only if you have two physical hard disks on your computer.
Press 5, and then press ENTER. When you do this, the selection changes from the physical disk 1 (master) to the physical disk 2 (slave). Press 1 to select the Create DOS partition or Logical DOS Drive menu option, press ENTER, press 2 to select the Create Extended DOS Partition menu option, and then press ENTER. When you make your slave drive an extended MS-DOS partition, your drive letters does not change. For example, if the first drive contains partition C and partition D, your slave drive becomes D unless you set the slave drive as an extended partition. If you skip this step and just create another primary MS-DOS partition for the slave drive, the new drive becomes drive D and what used to be drive D, changes to drive E.You can partition the slave drive to make other logical drives just as you did with the original master drive. If your computer cannot detect the new drive, you may need to add the following line to your Config.sys file, where drive is a letter that is greater than the last drive letter on the computer (including the CD-ROM drive): lastdrive=drive. After you finish using the Fdisk tool, format the new partitions so that you can use them. After you press ESC to quit the Fdisk tool, restart your computer to start
Windows.
How to Format a Slave Hard Disk
To format your new partition or partitions, use one of the following methods, depending on your file system. For a FAT16 file system: Double-click My Computer, right-click the partition that you just created, click Format, click Full, and then click Start. After the format procedure is complete, click OK to close the dialog box.
For a FAT32 file system: Click Start, point to Programs, point to Accessories, point to System Tools, click Drive Converter (FAT32), and then click Next. In the Drives box, click the drive that you want to convert to the FAT32 file system.
Click Next, and then click OK.
Click Next, click Next, and then click Next again.
When the conversion procedure is finished, click Finish.
NOTE: Do not use the /s switch that you used when you set up drive C. All you need to do is to format the drive or drives so that you can use them (for example, if you created two new drive letters, you need to format both drives).


How to Partition and Format Your Hard Disk by Using Windows XP Setup

IMPORTANT: If you follow these steps on a hard disk that is not empty, all of the data on that hard disk is permanently deleted. Insert the Windows XP CD-ROM into your CD-ROM drive or DVD-ROM drive, or insert the first Windows XP Setup boot disk into the floppy disk drive if you are starting from Setup boot disks, and then restart the computer.
NOTE: To start your computer from the Windows XP CD-ROM (or from the Setup boot disk), your computer must be configured to start from the CD-ROM drive or DVD-ROM drive (or the floppy disk drive). In some cases, you may have to modify your computer's BIOS settings to do this. For information about how to configure your computer to start from the CD-ROM drive or DVD-ROM drive (or the floppy disk drive), see the documentation that is included with your computer, or contact the computer manufacturer. If you are starting the computer from the Windows XP CD-ROM, select any options that are required to start the computer from the CD-ROM drive if you are prompted to do so.
Note: If your hard disk controller requires a third-party original equipment manufacturer (OEM) driver, press F6 to specify the driver. If you are starting from the Windows XP Setup boot disks, insert each of the additional disks when you are prompted, and then press ENTER to continue after inserting each disk.
At the Welcome to Setup page, press ENTER to continue. Press F8 to accept the Windows XP Licensing Agreement.
If an existing Windows XP installation is detected, you are prompted to repair it. Press ESC (do not repair).
All existing partitions and unpartitioned spaces are listed for each physical hard disk. Use the arrow keys to select the partition or unpartitioned space where you want to create a new partition, and then press D to delete an existing partition or press C to create a new partition using unpartitioned space. If you press D to delete an existing partition, you must then press L (or press ENTER, and then press L if it is the System partition) to confirm that you want to delete the partition. Repeat this process for each of the existing partitions that you want to use for the new partition. When all the partitions are deleted, you can then select the resulting unpartitioned space and then press C to create the new partition.
Note: If you want to create a partition where one or more partitions already exist, you must first delete the existing partition or partitions and then create the new partition. Type the size (in megabytes, or MB) that you want to use for the new partition, and then press ENTER, or just press ENTER to create the partition using the maximum size.
Repeat Steps 4 and 5 to create additional partitions if you want to.
If you want to install Windows XP, use the arrow keys to select the partition you want to install Windows XP on, and then press ENTER. If you do not want to format the partition and install Windows XP, press F3 two times to quit Setup, and then do not continue with the following steps. In this case, you must use another utility to format the partition. Select the format option that you want to use for the partition, and then press ENTER. The options are:
Format the partition by using the NTFS file system (Quick)
Format the partition by using the FAT file system (Quick)
Format the partition by using the NTFS file system
Format the partition by using the FAT file system
Leave the current file system intact (no changes)
The option to leave the current file system intact is not available if the selected partition is a new partition. The FAT file system options is not available if the selected partition is more than 32 gigabytes(GB). If the partition is larger than 2 GB, Setup uses the FAT32 file system (you must press ENTER to confirm). If the partition is smaller than 2 GB, Setup uses the FAT16 file system.
NOTE: If you deleted and created a new System partition but you are installing Windows XP on another partition, you will be prompted to select a file system for both the System and Boot partitions at this point. After Setup formats the partition, follow the on-screen instructions to continue Setup. After Setup is complete, you can use the Disk Management tools in Windows XP to create or format additional partitions.

Tips on cleaning up your computer

How to clear out the Internet Files.

First right click on the Internet Explorer Icon, then click on properties.
Now click on Delete cookies then OK.
Now click on Delete files, now put a check in Delete all offline content. Now click OK.
Now click on Clear History, then yes.
Now click ok to close out the Internet Properties.

How to clear out the TEMP folder.

Double left click on My Computer.
Double left click on "C" drive.
Double left click on the Windows folder.
If the files are hidden click on Show Files.
Double left click on the TEMP folder.
Now go to Edit, then select all and click on the delete button on the main toolbar.
You should not delete any files newer than 3 days.
If you don't have a delete button on the toolbar then go to File and then Delete.
Click on yes when asked if you want to send the items to the recycle bin.

How to clear out the Applog folder.

Double left click My Computer.
Double left click on "C" drive.
Double left click on the Windows folder.
Go to "View", then "Folder Options".
Select "Show all files" under the Hidden Files" list.
Click on OK.
Now click on the "Show Files" in the "Windows" box.
Double Left click on Applog Folder.
Now click on Edit, then Select all.
Now click on delete or go to "File" then Delete.
You may want to undo the "Show all Files" now.
Just follow the same steps as above except choose "Do not show hidden or systems files" then OK.
I would do this about once a month.

Be sure to run Scandisk and Defrag REGULARLY ! Run ScanDisk First.
Err Msg: ScanDisk Has Restarted 10 Times Because Windows...

ScanDisk has restarted 10 times because Windows or another program has been writing to this drive. Quitting some running programs may enable ScanDisk to finish sooner. Do you want to continue receiving this warning?

CAUSE
This problem can occur:
If Windows or another program writes to the hard disk while ScanDisk is scanning that disk. If you have many items on the Quick Launch toolbar (which appears to the right of the Start button). If an item on the Quick Launch toolbar periodically writes to the hard disk while ScanDisk runs.
NOTE: This can occur when an antivirus program is running or when a Microsoft Word document is open and the Autosave feature is active.

RESOLUTION
To resolve this problem, try the following methods. After you use each method, run ScanDisk to see if the problem is resolved. If the problem still occurs, continue to the next method. Turn Off the Quick Launch Toolbar While You Run ScanDisk. To do this, follow these steps:
Right-click a blank area of the taskbar. On the shortcut menu that appears, point to Toolbars, and then click Quick Launch. NOTE: A check mark appears next to Quick Launch. When you click Quick Launch, the check mark disappears. The Quick Launch toolbar is disabled. After you run ScanDisk, follow steps 1 and 2 to again enable the toolbar. Remove Items from the Quick Launch Toolbar You can do this to help determine if an item is causing ScanDisk to restart. To remove an item from the Quick Launch toolbar, follow these steps:
Right-click the item that you want to remove.
On the shortcut menu that appears, click Delete.
On the Confirm File Delete message that appears, click Yes.
NOTE: When you remove an item from the Quick Launch toolbar, you do not delete the program file, you delete only a shortcut to that file. To restore a shortcut to the Quick Launch toolbar, drag it to a blank area of the Quick Launch toolbar.

Quit All Running Programs

To quit all programs that are currently running, follow these steps: Press CTRL + ALT + DELETE. In the Close Program dialog box, click any program in the list, except Explorer or Systray, and then click End Task. If you are prompted to click End Task again, do so. NOTE: Explorer and Systray are Windows components that Windows requires to function properly. Repeat steps 1 and 2 for each program that is listed in the Close Program dialog box, except Explorer and Systray.

Follow these steps to set the screen saver to None:

Right-click the desktop, and then click Properties.
Click the Screen Saver tab.
In the Screen Saver box, click None.
Click OK.
If the AutoUpdate "Update Reminder" is running in the system tray, it may also interfere with Scandisk. You can remove the AutoUpdate notification by clicking the Update Reminder icon and then either installing the recommended updates or clicking Remind Me Later. After you quit all running programs, try running ScanDisk again.

Restart in Safe Mode
Windows Me or Windows 98

To start your computer in Safe mode, restart your computer, press and hold down the CTRL key after your computer completes the Power On Self Test (POST), and then choose Safe Mode from the Startup menu.
NOTE: If you press and hold down the CTRL key when your computer starts, you may receive a keyboard error message. If this occurs, you can safely ignore the keyboard error message. After you restart the computer in Safe mode, try running ScanDisk again.

Windows 95

To restart your computer in Safe mode, click Start, click Shut Down, click Restart The Computer, and then click Yes. When you see the "Starting Windows 95" message, press the F8 key.After you restart the computer in Safe mode, try running ScanDisk again.

Windows 98 or Windows 95

To restart to a command prompt and run ScanDisk in real mode, follow these steps:
Click Start, click Shut Down, click Restart the computer in MS-DOS mode, and then click Yes or OK.
At the command prompt, type scandisk, and then press ENTER.
The first time this error message occurs, you have the option to continue to receive the warning message or to suppress the error message in the future. You can also click Cancel. If you click Yes to continue receiving the error message, the message is displayed again if ScanDisk is unable to complete a disk scan after 10 passes. However, if you click No, ScanDisk continues to run until it either finishes or is canceled.
Also be sure to empty the Recycle Bin !


Tips on cleaning up your computer: Windows 2000
How to clear out the Internet Files.

First right click on the Internet Explorer Icon, then click on properties.
Now click on Delete cookies then OK.
Now click on Delete files, now put a check in Delete all offline content. Now click OK.
Now click on Clear History, then yes.
Now click ok to close out the Internet Properties.

How to clear out the TEMP folder.

Double left click on My Computer.
Double left click on "C" drive.
Double left click on the Winnt folder.
If the files are hidden click on Show Files.
Double left click on the TEMP folder.
Now go to Edit, then select all and click on the delete button on the main toolbar.
You should not delete any files newer than 3 days.
If you don't have a delete button on the toolbar then go to File and then Delete.
Click on yes when asked if you want to send the items to the recycle bin.

Be sure to run Scandisk and Defrag REGULARLY ! Run ScanDisk First.
To run a ScanDisk on W2k....

Double left click on My Computer.
Right click on "C" Drive.
Click Properties.
Click Tools.
Click on Check Now … under Error-checking
Click Start.
If you want to do a more in-depth error checking there are 2 other options available:
First option is to Automatically fix file system errors (choosing this option will require a restart of the computer to run). When choosing this option you will see a box pop up that says, "The check disk could not be preformed because exclusive access to the drive could not be obtained. Do you want to schedule this disk check to occur next time you restart the computer?" When prompted for this you would choose Yes if you want it to run on the next reboot of the system.The second option for error checking is Scan for and attempt recovery of bad sectors (this will not require a restart of the system)
Also be sure to empty the Recycle Bin !


Tips on cleaning up your computer: Windows Xp
How to cut off the System Restore.

Right click My Computer.
Click on Properties.
Click on System Restore Tab.
Put a check beside of Turn off System Restore.
Click Apply and OK.

How to clear out the Internet Files.

First right click on the Internet Explorer Icon, then click on properties.
Now click on Delete cookies then OK.
Now click on Delete files, now put a check in Delete all offline content. Now click OK.
Now click on Clear History, then yes.
Now click ok to close out the Internet Properties.

How to clear out the TEMP folder.

Double left click on My Computer.
Double left click on "C" drive.
Now go to "tools" and select Folder options.
Now click on View and select "show hidden files and folders" under the folder Hidden Files and Folders.
Click apply and then OK.
Double left click on the Documents and Settings folder.
Double left click on the main User's Folder. (example: John Doe)
Double left click on the Local Settings folder.
Double left click on the TEMP folder.
Now go to Edit, then select all and click on the delete button on the main toolbar.
You should not delete any files newer than 3 days.
If you don't have a delete button on the toolbar then go to File and then Delete.
Click on yes when asked if you want to send the items to the recycle bin.

How to clear out the Prefetch Folder.

Double left click My Computer.
Double left click on "C" drive.
Double left click on the Windows folder.
Double left click on the Prefetch folder.
Now click on Edit, then Select all.
Now click on delete or go to "File" then Delete.
I would do this about once a month.

Be sure to run Scandisk and Defrag REGULARLY ! Run Scandisk First.
To run a ScanDisk on XP....

Double left Click My Computer.
Right click on "C" Drive.
Click Properties.
Click Tools.
To do a Scandisk Click check now.
Put a check in both boxes "Automatically Fix File System Errors" and "Scan for and attempt Recovery of Bad Sectors".
Then click Start.
Now when asked "Do you want to Schedule this Disk Check to occur the next time you Restart the Computer",
Click Yes.
Now Restart your Computer.
Also be sure to empty the Recycle Bin !

Defrag

Double left Click My Computer.
Right click on "C" Drive.
Click Properties.
Click Tools.
Click on Defragment Now
Click on Defragment

After Following All the Above, Turn System Restore Back On.

Right click My Computer.
Click on Properties.
Click on System Restore Tab.
Remove the check beside of Turn off System Restore.
Click Apply and OK.


Tips on cleaning up your computer: Remove Adware & Spyware

Spyware is software that sends information from the user's computer without their knowledge whenever the computer connects to the Internet. Usually the information sent is benign in nature, mostly concerned with general marketing information (ie., spending habits) rather than specific information like credit card numbers, although some programs are capable of retrieving specific information as well. The problem with Spyware lies in the fact that this information is transmitted without informed consent. Additionally, Spyware programs are sometimes poorly written, containing bugs and causing the computer to malfunction. Spyware does not respect your privacy. If you are bothered with this, then removing adware from your computer might be a consideration. Click HERE to be taken to the Link.


Auto Delete Temporary Folder (XP Pro)

First go to Start, then run and type in gpedit.msc
Next select -> Computer Configuration/Administrative Templates/Windows Components/Terminal Services/Temporary Folder. Then right click "Do Not Delete Temp Folder Upon Exit" Go to properties and hit disable. Now next time Windows puts a temp file in that folder it will automatically delete it when its done! Remember, GPEDIT (Group Policy Editor) is only available in XP Pro.


How to remove all the System Restore points except the recent one?

All the System Restore points can be cleared by disabling and enabling the System Restore option. However, Windows XP provides an option to clear all the System Restore points except the very recently created point. This can be accomplished through the Disk Cleanup Utility in XP.
Click Start, Run and type CLEANMGR and press Enter.
Select the hard disk partition and press OK.
At the top of the dialog, click the tab More Options.
Under System Restore section, click the button "Clean up..."
Now, all the System Restore points (except the recent one) are cleared and more hard disk space will be free.


Remove Deleted Programs from the Uninstall List

If you deleted a program instead of uninstalling it, most likely the program will still be listed in the windows uninstall list. Follow the directions below to remove programs from list manually.

1. Click on Start then Run and type regedit.
2. Navigate to HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall.
3. Delete the folder of the program.
Also See "How to Manually Remove Programs from the Add or Remove Programs Tool"


A Better Windows XP Disk Cleanup Tool

These instructions will show you how to create an unattended disk cleanup which will also empty your prefetch folder providing Windows XP is installed in c:\windows.

1. Create a new text file and place the following contents inside:
c:\windows\system32\cleanmgr.exe /dc /sageset: 1
c:
cd \
cd c:\windows\prefetch
del *.* /q

2. Save the file, changing the extension from .txt to .bat
Now name it diskclean.bat

3. Execute the file. This will run the Disk Cleanup program in a special mode which asks what items you will want cleaned when Disk Cleanup performs an unattended cleanup. Check the items you wish to have cleaned up, then click OK.

4. Right-click on the diskclean.bat file and click edit. Change the first line to read:

c:\windows\system32\cleanmgr.exe /dc /sagerun: 1

5. Save the file. You can execute this file in place of running Disk Cleanup, or, to have this program run unattended, run the Add Scheduled Task Wizard in the Control Panel and create a scheduled task using the clean.bat file you just created.

Thanks for visiting my blog.Now kindly thanks the publisher by clicking any (ads) available in the blog.You can use My Google Search Engine as your default search engine.Add Comments to my blog posts and share it via different social networks. Mention the flaws left in posts and let me able to better my blog. Moreover,You can suggest me some related links to my blog posts.Bookmark it,soon you will need it again.I will be personally thankful to you.
 

Tips And Tricks Copyright © 2009 Premium Blogger Dashboard Designed by SAER